- New
Three-story brick building with partially collapsed facade and piles of ground floor debris (8)
€5.70
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The interior is fully playable and features alignment pins for easy multi-floor assembly and the model comes in 8 separate parts. Fully assembled, the model reaches 339x143x205mm at 28mm scale. You'll need a print bed of 210x210mm or larger (smaller printers can still handle it with a couple of extra cuts, and we'll be happy to help if needed).
In partnership with the designer WoWBuildings. Please note that the files are for private use only and cannot be shared or used commercially. 100% Hand-Modeled: Every STL file is meticulously crafted by a human creator, absolutely no AI-generated geometry.
If you have any questions, don't hesitate to reach out !
WB-VB-B08
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 8
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 339x143x205mm
Specific References
Below are our recommended FDM printing parameters: adjust these general guidelines to suit your machine, filament, or preferences.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: this detailed geometry relies on external supports to maintain its complex shapes and features.
Note: Your slicer’s standard settings are an ideal baseline for beginners.