- New
Set of 5 tall ruined building walls with detailed brickwork and rubble bases (6)
€4.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model comes in 7 separate parts. You'll need a print bed of 210x210mm or larger (smaller printers can still handle it with a couple of extra cuts, and we'll be happy to help if needed).
In partnership with the designer WoWBuildings. Please note that the files are for private use only and cannot be shared or used commercially. Human-Made STL: Guaranteed 100% manual 3D modeling, no generative AI tools are used in our design workflow.
If you have any questions, don't hesitate to reach out !
WB-VB-A06
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 7
- Theme
- Modern
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Not applicable
- Minimum build plate (FDM)
- 210x210mm
Specific References
Use these FDM parameters as a reliable baseline for your prints: treat these as baselines, fine-tune them for your specific hardware and material.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: minimal supports required: only a few small touchpoints are needed for specific overhanging details (approx. 35g of supports needed for this 680g total project).
Note: Your slicer's default 'standard profiles' provide a solid, reliable foundation for beginners.
Average / Part
⏱️ 8h
From 3h to 12h40 (6 parts total)
Total Print Time
⏳ ~47h40
Sum of 6 individual parts
Filament Used
🧵 ~680g
Includes 35g for supports