- New
Ruined brick house model with exposed roof rafters and crumbling walls (1)
€4.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model comes in 2 separate parts. The interior is fully playable and features alignment pins for easy multi-floor assembly. Fully assembled, the model reaches 142x196x145mm at 28mm scale. The model fits on any printer with a minimum build area of 210x210mm (if needed, additional cuts can be made easily and we'll be happy to help).
In partnership with the designer WoWBuildings. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. Pure 3D Mesh: Genuine human-made STL files, zero AI was used to create these 3D models.
If you have any questions, don't hesitate to reach out !
WB-VB-B01
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 2
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 142x196x145mm
Specific References
Below are our recommended FDM printing parameters: adjust these general guidelines to suit your machine, filament, or preferences.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 35g of supports needed for this 235g total project).
Note: Default 'standard profiles' are a great way to start for easy and successful prints for beginners.
Average / Part
⏱️ 7h
7h10 and 6h40 for both parts
Total Print Time
⏳ ~13h50
Sum of 2 individual parts
Filament Used
🧵 ~235g
Includes 35g for supports