- New
Large ruined country house model with damaged brick walls and attached courtyard section (14)
€5.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The interior is fully playable and features alignment pins for easy multi-floor assembly. The model comes in 9 separate parts. The completed build stands at 292x219x188mm once assembled at 28mm scale and the model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help).
In partnership with the designer WoWBuildings. Personal use only: commercial use or file sharing is strictly prohibited, thank you for your understanding. Human-Made STL: Guaranteed 100% manual 3D modeling, no generative AI tools are used in our design workflow.
If you have any questions, don't hesitate to reach out !
WB-VB-B14
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 9
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 292x219x188mm
Specific References
Use these FDM parameters as a reliable baseline for your prints: treat these as baselines, fine-tune them for your specific hardware and material.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: this detailed geometry relies on external supports to maintain its complex shapes and features (approx. 110g of supports needed for this 640g total project).
Note: Your slicer’s standard settings are an ideal baseline for beginners.
Average / Part
⏱️ 4h40
From 1h to 12h20 (7 parts total)
Total Print Time
⏳ ~32h20
Sum of 7 individual parts
Filament Used
🧵 ~640g
Includes 110g for supports