- New
Extensive ruined stone building with multiple broken sections and visible internal structures (18)
€4.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
When fully assembled, the model reaches 385x155x145mm at 28mm scale. You'll need a print bed of 210x210mm or larger (smaller printers can still handle it with a couple of extra cuts, and we'll be happy to help if needed). The interior is fully playable and features alignment pins for easy multi-floor assembly. The model comes in 4 separate parts.
In official partnership with the designer WoWBuildings. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. STL & Visuals: 100% AI-free, handmade 3D model. The cover photo is AI-colorized as an inspiring painting guide to help you visualize the finished piece. All other images show the real, raw grey 3D renders.
If you have any questions, don't hesitate to reach out !
WB-VB-B18
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 4
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 385x155x145mm
Specific References
Below are our recommended FDM printing parameters: adjust these general guidelines to suit your machine, filament, or preferences.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 20g of supports needed for this 300g total project).
Note: A standard slicer profile offers a simple and effective starting point for beginners.
Average / Part
⏱️ 4h20
From 2h40 to 5h40 (4 parts total)
Total Print Time
⏳ ~17h
Sum of 4 individual parts
Filament Used
🧵 ~300g
Includes 20g for supports