- New
Destroyed two-story residential building with large holes in the roof and side wall (15)
€5.70
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model comes in 10 separate parts and the interior is fully playable and features alignment pins for easy multi-floor assembly. The model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help); the completed build stands at 435x211x151mm once assembled at 28mm scale.
In partnership with the designer WoWBuildings. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. 100% Human-Designed STL: Hand-modeled from scratch with zero generative AI, genuine 3D modeling only.
If you have any questions, don't hesitate to reach out !
WB-VB-B15
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 10
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 435x211x151mm
Specific References
Use these FDM parameters as a reliable baseline for your prints: treat these as baselines, fine-tune them for your specific hardware and material.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: this detailed geometry relies on external supports to maintain its complex shapes and features.
Note: Your slicer’s standard settings are an ideal baseline for beginners.