- New
Brick commercial building with a large ground floor shop window and no roof (30)
€4.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model comes in 3 separate parts, and the interior is fully playable and features alignment pins for easy multi-floor assembly. Fully assembled, the model reaches 89x86x141mm at 28mm scale. You'll need a print bed of 210x210mm or larger (smaller printers can still handle it with a couple of extra cuts, and we'll be happy to help if needed).
In partnership with the designer WoWBuildings. These files are intended for personal use only, redistribution or commercial use is not permitted. Pure 3D Mesh: Genuine human-made STL files, zero AI was used to create these 3D models.
If you have any questions, don't hesitate to reach out !
WB-VB-B30
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 3
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Store & Shop
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 89x86x141mm
Specific References
Use these FDM parameters as a reliable baseline for your prints: treat these as baselines, fine-tune them for your specific hardware and material.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 15g of supports needed for this 160g total project).
Note: Your slicer's default 'standard profiles' provide a solid, reliable foundation for beginners.
Average / Part
⏱️ 4h
3h20 and 4h30 for both parts
Total Print Time
⏳ ~7h50
Sum of 2 individual parts
Filament Used
🧵 ~160g
Includes 15g for supports