- New
Set of futuristic Sci-Fi fortifications with barricades, missiles, and crates (9)
€5.70
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help). The model comes in 19 separate parts.
In partnership with the designer WoWBuildings. These files are intended for personal use only, redistribution or commercial use is not permitted. Pure 3D Mesh: Genuine human-made STL files, zero AI was used to create these 3D models.
If you have any questions, don't hesitate to reach out !
WB-AW-A09
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 19
- Theme
- Science-Fiction
- Type
- Accessory
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Fortification & Defense
- Playable interior
- Not applicable
- Minimum build plate (FDM)
- 210x210mm
Specific References
Use these FDM parameters as a reliable baseline for your prints: treat these as baselines, fine-tune them for your specific hardware and material.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 10g of supports needed for this 75g total project).
Note: Default 'standard profiles' are a beginner-friendly baseline for your prints.
Average / Part
⏱️ 20min
From 10min to 1h10 (10 parts total)
Total Print Time
⏳ ~4h10
Sum of 10 individual parts
Filament Used
🧵 ~75g
Includes 10g for supports