- New
Ruined central building (Villers Bocage, 1944) (25)
€5.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model fits on any printer with a minimum build area of 210x210mm (if needed, additional cuts can be made easily and we'll be happy to help). When fully assembled, the model measures 623x281x120mm at 28mm scale. The model comes in 7 separate parts.
In partnership with the designer WoWBuildings. Personal use only: commercial use or file sharing is strictly prohibited, thank you for your understanding. 100% Human-Designed STL: Hand-modeled from scratch with zero generative AI, genuine 3D modeling only.
If you have any questions, don't hesitate to reach out !
WB-VB-B25
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 7
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Not applicable
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 623x281x120mm
Specific References
For best results, we suggest these FDM settings: treat these as baselines, fine-tune them for your specific hardware.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: this detailed geometry relies on external supports to maintain its complex shapes and features (approx. 180g of supports needed for this 865g total project).
Note: Your slicer’s standard settings are an ideal baseline for beginners.
Average / Part
⏱️ 6h40
From 50min to 12h (7 parts total)
Total Print Time
⏳ ~47h10
Sum of 7 individual parts
Filament Used
🧵 ~865g
Includes 180g for supports