- New
Modular miniature ruined stone wall set featuring intricate block details and debris (2)
€0.00
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help). The model comes in 22 separate parts.
Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. Human-Made STL: Guaranteed 100% manual 3D modeling, no generative AI tools are used in our design workflow.
If you have any questions, don't hesitate to reach out !
WB-VB-A02
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 22
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Playable interior
- Not applicable
- Minimum build plate (FDM)
- 210x210mm
Specific References
Below are our recommended FDM printing parameters: adjust these general guidelines to suit your machine, filament, or preferences.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: minimal supports required: only a few small touchpoints are needed for specific overhanging details (approx. 5g of supports needed for this 140g total project).
Note: A standard slicer profile offers a simple and effective starting point for beginners.
Average / Part
⏱️ 30min
From 10min to 1h (22 parts total)
Total Print Time
⏳ ~12h
Sum of 22 individual parts
Filament Used
🧵 ~140g
Includes 5g for supports