- New
Laser gun turret on axis 2 (+ supported version)
€1.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model comes in 2 separate parts, and the interior is fully playable. The model fits on any printer with a minimum build area of 210x210mm (if needed, additional cuts can be made easily and we'll be happy to help). Fully assembled, the model reaches 69x41x37mm at 28mm scale.
In partnership with the designer Tharyon Braz. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. 100% Hand-Modeled: Every STL file is meticulously crafted by a human creator, absolutely no AI-generated geometry.
If you have any questions, don't hesitate to reach out !
TB-PA-G02
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- Theme
- Science-Fiction
- Type
- Gun
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- Yes
- Style
- Realistic
- Subtype
- Turret
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 69x41x37mm
Specific References
Use these FDM parameters as a reliable baseline for your prints: treat these as baselines, fine-tune them for your specific hardware and material.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 0g of supports needed for this 10g total project).
Note: A standard slicer profile offers a simple and effective starting point for beginners.
Total Print Time
⏳ ~40min
Filament Used
🧵 ~10g