- New
Laser cannon on platform with firing dome (2)
€1.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
Once printed, the model measures 93x74x58mm at 28mm scale and the model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help). The interior is fully playable, and the model is provided as a single solid piece.
In partnership with the designer 3D Fortress. Please note that the files are for private use only and cannot be shared or used commercially. Human-Made STL: Guaranteed 100% manual 3D modeling, no generative AI tools are used in our design workflow.
If you have any questions, don't hesitate to reach out !
3F-CM-G02
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 1
- Theme
- Science-Fiction
- Type
- Gun
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Turret
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 93x74x58mm
Specific References
Below are our recommended FDM printing parameters: adjust these general guidelines to suit your machine, filament, or preferences.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: this detailed geometry relies on external supports to maintain its complex shapes and features (approx. 5g of supports needed for this 35g total project).
Note: Your slicer’s standard settings are an ideal baseline for beginners.
Total Print Time
⏳ ~2h
Filament Used
🧵 ~35g
Includes 5g for supports