- New
Large medieval house with awning and concave roofs (36)
€7.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
Provided in 1/56 scale (28mm), the model can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The completed build stands at 117x97x190mm once assembled at 28mm scale.
The model can be printed on a bed of at least 150x150mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help). The model comes in 3 separate parts. The interior is fully playable.
In partnership with the designer Moliponchik. Please note that the files are for private use only and cannot be shared or used commercially. Human-Made STL: Guaranteed 100% manual 3D modeling, no generative AI tools are used in our design workflow.
If you have any questions, don't hesitate to reach out !
-60% OFF 💰 SAVE MONEY! Get this design in a bundle : Medieval village pack No. 7 View Pack →
MO-MV-B36
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 3
- Theme
- Medieval
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- House & Apartment
- Playable interior
- Yes
- Minimum build plate (FDM)
- 150x150mm
- Total dimensions (in 28mm)
- 117x97x190mm
Specific References
For best results, we suggest these FDM settings: treat these as baselines, fine-tune them for your specific hardware.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 10g of supports needed for this 205g total project).
Note: Default 'standard profiles' are a beginner-friendly baseline for your prints.
Average / Part
⏱️ 3h50
4h30, 3h20 and 3h40 for each part
Total Print Time
⏳ ~11h30
Sum of 3 individual parts
Filament Used
🧵 ~205g
Includes 10g for supports