- New
Destroyed two-story house model featuring broken brickwork and visible roof support beams (13)
€4.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help); when fully assembled, the model measures 181x158x145mm at 28mm scale. The interior is fully playable and features alignment pins for easy multi-floor assembly, and the model comes in 3 separate parts.
In partnership with the designer WoWBuildings. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. Model Info: 100% AI-free, handmade STL. The cover photo features an AI-colorized preview to provide instant painting inspiration. Other images show the exact, raw grey 3D renders.
If you have any questions, don't hesitate to reach out !
WB-VB-B13
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 3
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 181x158x145mm
Specific References
For best results, we suggest these FDM settings: treat these as baselines, fine-tune them for your specific hardware.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 30g of supports needed for this 250g total project).
Note: Default 'standard profiles' are a great way to start for easy and successful prints for beginners.
Average / Part
⏱️ 5h
8h20, 1h40 and 4h50 for each part
Total Print Time
⏳ ~14h50
Sum of 3 individual parts
Filament Used
🧵 ~250g
Includes 30g for supports