- New
Destroyed brick house with exposed interior and crumbling walls on a rubble base (28)
€4.90
EU citizens only : price excl. VAT, will be calculated at checkout
Secure paiement
Hello,
The model is provided in 1/56 scale (28mm), but can be easily adapted to your preferred scale using your slicer. For example:
Provided scale: 28mm (1/56)
to 6mm (1/280) x20%
to 10mm (1/200) x35%
to 15mm (1/100) x56%
to 20mm (1/72) x78%
to 25mm (1/64) x88%
to 1/48 scale x117%
to 1/35 scale x160%
Looking for assistance? Try our automated calculator, featuring numerous scales and games:
Automated Scale & Game Calculator
Easily convert dimensions for a wide range of tabletop games.
The model can be printed on a bed of at least 210x210mm (if your printer is smaller, no problem: you can simply add extra cuts, and we'll be happy to help). Fully assembled, the model reaches 291x251x206mm at 28mm scale. The interior is fully playable and features alignment pins for easy multi-floor assembly. The model comes in 5 separate parts.
In partnership with the designer WoWBuildings. Files available for strictly personal and exclusive use: no commercial use or sharing with others is allowed, thank you. 100% Hand-Modeled: Every STL file is meticulously crafted by a human creator, absolutely no AI-generated geometry.
If you have any questions, don't hesitate to reach out !
WB-VB-B28
Data sheet
- File original scale (can be easily modify)
- 1/56
- Number of parts
- 5
- Theme
- Modern
- Type
- Building
- FDM-friendly ? (filament printing)
- Yes
- With pre-supported version
- No
- Style
- Realistic
- Subtype
- Building ruins
- Playable interior
- Yes
- Minimum build plate (FDM)
- 210x210mm
- Total dimensions (in 28mm)
- 291x251x206mm
Specific References
For best results, we suggest these FDM settings: treat these as baselines, fine-tune them for your specific hardware.
Layer height: 0.2mm (0.16mm or 0.28mm layers synchronize perfectly with your printer's mechanics). For a premium finish, 0.12mm paired with spray filler primer makes lines disappear, though it increases print time. Going lower is discouraged: the minor visual gain isn't worth the exploding print times and heat creep risks.
Wall perimeters: 3 (for a resistant print).
Top/Bottom layers: at least 5 (to ensure sturdy results).
Infill: Gyroid, 8%-10% density (ideal for standard prints). On massive pieces, use Adaptive Infill to keep the structure sturdy, or Lightning Infill for the fastest, if the model doesn't need any mechanical strength.
Supports: some structural aid is necessary for the main overhangs to ensure a clean surface finish (approx. 60g of supports needed for this 575g total project).
Note: Your slicer’s standard settings are an ideal baseline for beginners.
Average / Part
⏱️ 6h
From 1h50 to 9h (5 parts total)
Total Print Time
⏳ ~30h10
Sum of 5 individual parts
Filament Used
🧵 ~575g
Includes 60g for supports